All Categories

Darlington Optocoupler ORPC-825-EN-V1
<p>The ORPC-825 series devices each consists of an infrared emitting diodes, optically coupled to a Darlington phototransistor detector.These devices are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option.</p>
Inquiry Now

SHENZHEN ORIENT COMPONENTS CO.,LTD.

Main Products:

+8618219112492

tanhongyi@orient-opto.com

Darlington OptocouplerDarlington Optocoupler

Features

  1. Current transfer ratio(CTR: 600~7500% at IF = 1 mA, Vce = 2 V)
  2. High isolation voltage between input and output (Viso = 5000 V rms )
  3. Creepage distance > 7.62 mm
  4. Operating temperature up to + 110°C
  5. Compact small outline package
  6. The product itself will remain within RoHS compliant version
  7. Safety approval
  8. UL approved(No.E323844) VDE approved (No.40029733)
  9. CQC approved (No.CQC19001231254)
  10. In compliance with RoHS, REACH standards
  11. MSL Class Ⅰ

 

Instructions

  1. The ORPC-825 series devices each consists of an infrared emitting diodes, optically coupled to a Darlington phototransistor detector.These devices are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD option.

  2. Pin pitch of ORPC-825 is 2.54mm

 

Application Range

    1. Telephone set, telephone exchangers

    2. Sequence controllers

    3. System appliances, measuring instruments

    4. Signal transmission between circuits of different potentials and impedances

 

 

Pin Configuration 1,3. Anode

2, 4. Cathode

5.7. Emitter

6.8. Collector

 

Absolute Maximum Ratings (Ta=25℃)

Parameter

Symbol

Rated Value

Unit

Input

Forward Current

IF

60

mA

Peak forward Current(1us pulse)

IFP

1

A

Reverse Voltage

VR

6

V

Consume Power

P

100

mW

Output

Collector and emitter Voltage

VCEO

40

V

Emitter and collector Voltage

VECO

7

Collector Current

IC

80

mA

Consume Power

PC

150

mW

Total Consume Power

Ptot

200

mW

*1 Insulation Voltage

Viso

5,000

Vrms

Rated Impulse Insulation Voltage

VIORM

630

V

Working Temperature

Topr

-55 to + 110

Deposit Temperature

Tstg

-55 to + 125

*2 Soldering Temperature

Tsol

260

*1. AC Test, 1 minute, humidity = 40~60%

 

Isolation voltage shall be measured using the following method.

    1. Short between anode and cathode on the primary side and between collector and emitter on the secondary side.

    2. The isolation voltage tester with zero-cross circuit shall beused.

    3. The waveform of applied voltage shall be a sine wave.

*2. soldering time is 10 seconds

 

Electrical optical characteristics at TA=25℃

Parameter

Symbol

Min

Typ.*

Max

Unit

Condition

Input

Forward Voltage

VF

---

1.2

1.4

V

IF=20mA

Reverse Current

IR

---

---

5

μA

VR=5V

Collector Capacitance

Ct

---

30

250

pF

V=0, f=1KHz

Output

Collector to Emitter Current

ICEO

---

---

1

uA

VCE=10V, IF=0mA

Collector and Emitter attenuation Voltage

BVCEO

40

---

---

V

IC=0.1mA IF=0mA

Emitter and Collector attenuation Voltage

BVECO

7

---

---

V

IE=0.1mA IF=0mA

 

*1 Current conversion ratio

CTR

600

---

7500

%

 
             

IF=1mA

Transfo rming

Collector Current

IC

6

---

75

mA

VCE=2V

Charact eristics

Collector and Emitter Saturation Voltage

VCE(sat)

---

0.8

1

V

IF=20mA IC= 5mA

Insulation Impedance

Riso

5×1010

1×1012

---

Ω

DC500V 40~60%R.H.

 

Floating Capacitance

Cf

---

0.6

1.0

pF

V=0, f=1MHz

 

Cut-off Frequency

fc

1

6

---

kHz

VCE=5V, IC=2mA RL=100Ω, -3dB

 

Rise Time

tr

---

60

300

μs

VCE=2V,

             

IC=10mA

 

Descend Time

tf

---

53

250

μs

RL=100Ω

*1 Current Conversion Ratio = IC / IF × 100%

Order Information

Part Number

ORPC-825T-W-X-Y-Z

 

Note

T = Lead form option (S, M or none)

W = Tape and reel option (TP,TP1 or none). X = Lead frame option (F: Iron, C:copper)

Y = ‘V’ code for VDE safety (This options is not necessary).

Z = ‘G’ code for Halogen free (This options is not necessary).

  • VDE Code can be selected.

  • Halogen Free can be selected.

Option

Description

Packing quantity

None

Standard DIP-8

45 units per tube

M

Wide lead bend (0.4 inch spacing)

45 units per tube

S(TA)

Surface mount lead form (low profile) + TA tape & reel option

1000 units per reel

S(TA1)

Surface mount lead form (low profile) + TA1 tape & reel option

1000 units per reel

 

Naming Rule

    1. Manufacturer : ORIENT.

    2. 825 denotes Part Number.

    3. Lead frame Code :‘F’ means Iron,‘C’ means Copper.

    4. Year Code : '1' means '2021' and so on.

    5. Week Code : 01 means the first week, 02 means the second week and so on.

    6. Day Code :“A to G” means “Monday to Sunday”

    7. VDE Code . (Optional)

    8. HF Code :Halogen Free. (Optional)

    9. Anode.

      • Halogen Free Mark can be selected.

      • VDE Mark can be selected.

 

Outer Dimension ( Unit:mm)

  1. ORPC-825

Darlington Optocoupler ORPC-825-EN-V1Darlington Optocoupler ORPC-825-EN-V1

  1. ORPC-825M

Darlington Optocoupler ORPC-825-EN-V1Darlington Optocoupler ORPC-825-EN-V1

 

  1. ORPC-825S

Darlington Optocoupler ORPC-825-EN-V1Darlington Optocoupler ORPC-825-EN-V1

 

Taping Dimensions

  1. ORPC-825S-TA

Darlington Optocoupler ORPC-825-EN-V1

 

  1. ORPC-825S-TA1

Darlington Optocoupler ORPC-825-EN-V1

 

Description

Symbol

Dimension in mm(inch)

Tape wide

W

16±0.3(0.63)

Pitch of sprocket holes

P0

4±0.1(0.15)

Distance of compartment

F

7.5±0.1(0.295)

P2

2±0.1(0.079)

Distance of compartment to compartment

P1

12±0.1(0.472)

Package Type

TA/TA1

Quantities(pcs)

1000

 

package dimension

DIP Type

Packing Information

Packing type

Tube

Qty per Tube

45pcs

Small box (Inner) Dimension

525*128*60mm

Large box (Outer) Dimension

545*290*335mm

The Amount per Inner Box

2,250pcs

The Amount per Outer Box

22,500pcs

 

SOP Type

Packing Information

Packing type

Reel type

Tape Width

16mm

Qty per Reel

1,000pcs

Small box (inner) Dimension

345*345*58.5mm

Large box (Outer) Dimension

620x360x360mm

Max qty per small box

2,000pcs

Max qty per large box

20,000pcs

 

Packing Label Sample

Darlington Optocoupler ORPC-825-EN-V1

Note:

  1. Material Code :Product ID.

  2. P/N :Contents with "Order Information" in the specification.

  3. Lot No. :Product data.

  4. D/C :Product weeks.

  5. Quantity :Packaging quantity.

 

Reliability Test

  1. Temperature Profile Of Soldering

  2. IR Reflow soldering (JEDEC-STD-020C compliant)

 

One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times.

Profile item

Conditions

Preheat

  • Temperature Min (T Smin )

  • Temperature Max (T Smax )

- Time (min to max) (ts)

150˚C

200˚C

90±30 sec

Soldering zone

- Temperature (TL )

- Time (t L )

217˚C

60 sec

Peak Temperature

260˚C

Peak Temperature time

20 sec

Ramp-up rate

3˚C / sec max.

Ramp-down rate from peak temperature

3~6˚C / sec

Reflow times

≤3

Packing Label Sample

 

Wave soldering (JEDEC22A111 compliant

One time soldering is recommended within the condition of temperature.

Temperature

Time

260+0/-5˚C

10 sec

Preheat temperature

Preheat time

5 to 140˚C

30 to 80 sec

Packing Label Sample

 

Hand soldering by soldering iron

Allow single lead soldering in every single process. One time soldering is recommended.

3 sec max

380+0/-5˚C

Time

Temperature

Shenzhen Orient Components Co., Ltd. is the China leading manufacturer of optocouplers with mass production of more than 400 parts, serving markets like Telecommunications, Electric Power, Home appliances, Automotive and Green Energy. We are customer orientedand strive to provide rapid response and long termvalue-added services to our customers.

 

Shenzhen Orient Components Co., Ltd. is a national high-tech enterprise specializing in R&D, manufacturing of optoelectronic chips and optocouplers. Orient has mastered the core technology of chips and has a complete IDM industrial chain. Orient's optocouplers and optoelectronic devices have developed into domestic high-end products, including 9 categories and more than 400 models: transistor, Schmidt trigger, thyristor optocoupler, high speed isolation optocoupler, PhotoMos SSR optocoupler, IGBT isolation optocoupler, current and voltage sensor, linear optocoupler and optoelectronic sensor. All of them provide sevices to communication, home appliances, vehicles, new energy and other industries, and basically match with European, American and Japanese optocouplers in application. Currently, the overall production and sales of Orient rank at the top in China. With the continuous expansion of production in the next five years, Orient strives for a well-known international optocoupler brand. In 2021, as the leading brand in the optocoupler industry, Orient was selected as one of the National ' Specialized and Innovative 11 enterprises.

 

About Orient.png

 

ORIENT COMPONENTS

 

ORIENT COMPONENTSORIENT COMPONENTS

 

Send a direct inquiry to this supplier

To:

SHENZHEN ORIENT COMPONENTS CO.,LTD.

0.184256s